Psvane Copper Foil Caps - 0.22uF/600V (pair)

$149.00
MSRP: $220.00
Your Savings: $71.00 (32.27%)
Eligible for FREE Shipping

We ship this item worldwide with FREE airmail from Hong Kong with our logistics partner 'Audio For Less Ltd'. Please use the button below to place your order. All support and warranty are still provided by Grant Fidelity. Please purchase with confidence. No sales tax is added at check-out. It will be collected at destionation country by delivery courier if tax applies. 

 

 

Size of the caps: 

  • 0.47uF: 2 1/8" L x 1" diameter, 70g each 
  • 0.22uF: 2 1/8" L x 5/8" diameter, 35g each 
  • 0.10uF: 2 1/8" L x 7/16" diameter, 18g each
 

The Psvane Copper Foil capacitors are developed by Psvane Audio who also developed the black bottle Treasure Z-series vacuum tubes and the 2nd generation of Psvane T-series vacuum tubes. Both are considered one of the best current production tubes for improving your audio system performance.

These Copper foil capacitors are professionally manufacturered with high conductivity anti-oxidization Beryllium copper (BeCu) foil, teflon shielded leads with tin tip, and Dupont highest grade polyester film to achieve the best audio improvements over other type of caps.

Currently 3 ratings are available - 0.47uF/600V, 0.22uF/600V, 0.1uF/600V. They can be used in application of 450V and 630V circuit design and replacing your existing caps for sound improvement.

Not sure how good these caps are? Let's forget about the technical jargons and how the caps are rolled - let's hear how pros say about them then you can make your own judgement.

A high end amp OEM manufacturer's review / test for us on the Psvane  0.22uF caps:  (by Kit F)

 

Grant Fifelity has asked a high end tube amp manufacturer to test the new Psvane copper foil 0.22uf capacitor. The manuifacturer uses Audio Note copper foil and silver foil caps, the golds/silver and the silver/oil Mcaps, Jensen PIO caps in their product. Their test bench is equipped with modern test equipments for amplifier testing. They also have good test equipments for capacitor testing. In their listening room they have a $100K Audio Note M10 preamp which they use as a reference to guide their design of their top of the line preamp. They have been tuning their prototype preamp for several months now and their preamp uses two 0.22uf coupling caps. Grant Fidelity has asked them to put the 0.22uf Psvane cap in their prototype preamp and give some honest feedback.

There are two parts to the test. Testing the cap standalone with test equipments. Then Do the listening test.

The manufacturer built a test jig to burn in the cap for 250 hours with a random noise generator alternating with a sweep signal generator sweeping from 20Hz to 20Khz every 60 sec. After 250 hours here is the results of the instrument tests.

1) capacitor value @1Khz = 0.2223uf this is 1% tolerance it is excellent by itself but missed the printed spec of 0.5% but still very close.

2) We measure the cap with a complex impedance meter. this will give us the magnitude Z and the phase angle of the capacitor. For a perfect capacitor the phase angle should be -90 degrees over its intented operating frequency range.
Phase angle in degrees
40Hz -89.97
1Khz -89.74
10Khz -89.48
20Khz -89.42
50Khz -89.15
100Khz -88.83
200Khz -88.39
This is really excellent.

3) Leakage test
We applied 600V to the cap and mesaured the leakage current . the leakage current is 0.0 microampere. Excellent!

4) Dielectric absorption DA
This is a important parameter. It measures the residue electron charge left in the capacitor after a pulse has applied to it. The residue electron charge will slowly release into the circuit and smear the subsequent signals coming after the pulse. There is only a very small number of high end capacitor testers that has this capability. To give you a perspective electrolytic capacitors can have a DA of up to 10%. The older paper in oil (PIO) capacitor can have DA up to 6%. Most modern film caps have very low DA.....less than 0.1%.
The Psvane capacitor has 0.0% so you should expect very clean transients.

Well, we all know that when an audio device measures good it is only a necessary but not sufficient condition for it to sound good.
We need to do some long and crtical listening test. Here are the comments from the manufacturer.

We then put the Psvane caps into the prototype preamp. We go to the bench to do some square wave and frequency response tests. There is a significant improvement in the rise time of the square wave and it also shows up as better high frequency response.

 

The next thing we do is to take out the Audio Note M10 and put the prototype preamp with the Psvane copper foil capacitor into my reference system. After an hour of burning in the reference system we begin some serious listening. The first thing that strike us is that it is very smooth (we are listening to what the capacitor is really capable of after 250 hours of burning in ) on voice and violins. It even past the torture test of a couple of the very demanding violin CDs. It has excellent high frequency details. Bass notes from Oscar Peterson's CD sounded taut and clean. It has deep and also wide soundstage.

 

Usually when my friends take their preamps or DIY preamps to my music room to try to get a feel on how good is their unit relative to the Audio Note M10 preamp it always ended up after an hour I have to politely say....... Folks, it's been fun can we try something else?

 

Well, I have been listening to the Psvane caps on my prototype preamp for 3 days already and the unit is still in my reference system. It actually sounded very decent. We have to understand the return on investment in high end audio is not linear. A $100K preamp is not 50 times better than a $2K preamp. As you go higher into the top end audio your return on investment takes a deep dive. I am looking for components that will give my customers the biggest bang for the buck. I think the Psvane capacitors met this criterion.

I bought the review samples from Grant Fidelity.

 

- by Kit F.

 

 

 

Customer Reviews

Overall:
Reviewed by Gordon, 02/10/2012

Received by email:
"A brief comment about your wonderful copper capacitors. One thing most of us have learned by now is that having the costliest materials or "best parts" does not always translate into the best sound. I would not try to second guess your engineering and tell you how to design capacitors. You obviously have brought to the table engineering excellence tempered by a strong trust in your own ears. Teflon dielectric or something else, to me, is not the most important thing. Ultimately it is always the quality and enjoyability of the music. Your copper caps, at least in my system, interacting with everything else in the signal chain, contribute significantly to bringing out a wonderful musicality.

I applaud your hard work, excellent "ears", great products and integrity."